All Weather Pipe ID Tape

All Weather Pipe ID Tape

All Weather/Outdoor Pipe Identification Tape Specification

Campbells all weather, external pipeline identification tapes are produced from high specification polyester substrate and laminate to give long-term resistance to all chemical conditions and hostile environments. They demonstrate excellent ultra-violet resistance which preserves the colour fastness of the inks which themselves have a very high UV tolerance. Our all-weather pipeline identification tapes also have an extremely low chloride content which makes them suitable for use on all pipe surfaces, including stainless steel. Stock widths are usually 50mm, 100mm or 150mm with a length of 23m.


• Adhesive bonds well to a wide variety of substrates including, Metals, High surface energy and Low surface energy plastics.
• Ideal for applications requiring high initial tack, especially on Low surface energy plastics.
• High abrasion & chemical resistance.

Temperature Range: -40°C to +150°C

 Leachable chloride less than 10 parts per million.
Excellent water and UV resistance.


Construction

• 23 Micron Transparent Polyester Laminate with Thermostable Polymer Adhesive (Excellent UV protection) 
• 51 Micron Gloss White Polyester Carrier
• 20 Microns of Acrylic Adhesive (High Tack)
• 81 Micron Release Liner (Densified Kraft)


Technical Data

Measure Unit Result & Tolerance
Carrier Thickness (Without Liner) Microns 110 +/- 5%
Adhesive weight GSM 20 +/- 5%
Total thickness (With Liner) Microns 191 +/- 5%
Peel adhesion (Afera 5001) Steel Newtons/25mm 15 +/- 5%
Elongation (Afera 5004) % Less than 4

Performance Characteristics

Adhesion 90° Peel Adhesion Initial (20 Minute Dwell/RT) 90° Peel Adhesion Ultimate Adhesion 72 Hours Dwell at 70°C N/10mm
Aluminium 4.2 5.6
Stainless Steel 4.5 5.6
Powder Coating 3.0 5.2
Temperature Resistance 149°C for 24 hours: No significant visual change 0.7% MD shrinkage 0.9% CD shrinkage
Temperature Resistance -40°C for 3 days: No significant visual change
Humidity Resistance 24 hours at 38°C and 100% relative humidity No significant changes in appearance or adhesion

Environmental Performance

The properties defined are based on four-hour immersions at room temperature 22C unless otherwise noted. Samples were applied to stainless steel panels 24 hours prior to immersion and were evaluated one hour after removal from the solution for peel adhesion. Adhesion measured at 90 peel angle (FTM 2) at 305 mm/min.


Chemical Resistance Adhesion to Stainless Steel (N/10mm) Appearance (Visual) Edge Penetration (mm)
Heptane 3.8 No Change 5
Petrol 3.2 No Change 4
Diesel 4.8 No Change 1
SAE 15W40 Engine Oil 5.5 No Change 0
Dot 4 Brake Fluid 5.6 No Change 0
Screen Wash 7.0 No Change 0
IPA 5.3 No Change 1
Toluene 3.1 No Change 5
MEK 3.2 No Change 5
Lemsolve 5.0 No Change 2
Teepol Detergent 3.6 No Change 0
PH 4 7.0 No Change 0
PH 10 6.6 No Change 0
409 Solution 6.4 No Change 0

Special Consideration

For maximum bond strength, the surface should be clean and dry. Typical cleaning solvents are Heptane and Isopropyl Alcohol.

NOTE: When using solvents, read and follow the manufacturer’s precautions and directions for use For best bonding conditions, application surface should be at room temperature or higher. Low temperature surfaces, below 5C can cause the adhesive to become so firm that it will not develop maximum contact with the substrate. Higher initial bonds can be achieved through increased rubdown pressure.


Additional information

Tape performance is guaranteed for the first 6 months. Product must be stored at ambient temperature (Between 18c-23c), in its original box and in a dry atmosphere away from direct sunlight. For product traceability, please advise the batch identification number printed on the box. For optimum performance stock should be rotated and used within 12 months. The tapes have adhesive that are pressure sensitive so must be properly applied to ensure the best performance. Physical and performance characteristics shown above are obtained following tests recommended by AFERA and PSTC. The values given are typical values and do not constitute a specification. The user should determine whether the tape is suitable for the intended application. Materials do not contain any intentionally added halides, or deleterious materials to steel, but may have trace elements (Up to 200 parts per million).


Need even more protection? Our Clear PE Protective Tape can be used over the top of any of our Pipe ID Tapes to provide unbeatable lasting protection.


We don't mind what you call it; Pipeline ID Tape, Pipeline Marking Tape, Pipe Marker Tape, Pipe Marking Tape, Pipeline Marker Tape, Pipe Marker Tape, Pipe Labelling, Pipeline Labelling, Pipeline Labelling Tape, Pipeline Label Tape, Pipe Label, Pipe Labels, Pipeline Label, Pipeline Labels... We just care about quality, standards compliant tape!


 Remember; we can print any design and meet any specification.

Show:
Sort By:

NATURAL GAS (Arrows) - All Weather Pipe Identification (ID) Tape

Size: 150mm x 23m Colour: Yellow Ochre/Yellow Technical Specification: White Polyester laminated with Linerless Transparent Polyester Excellent UV Protection. Resists most common oils, aliphatic solvents such as Heptan, Kerosene and alcohols when applied to impervious substrates. Suitable for use o..

£157.23

NH4OH (Ammonium Hydroxide) - All Weather Pipe Identification (ID) Tape

Size: 150mm x 23m Colour: Black on Violet 22C37 Technical Specification: White Polyester laminated with Linerless Transparent Polyester Excellent UV Protection. Resists most common oils, aliphatic solvents such as Heptan, Kerosene and alcohols when applied to impervious substrates. Suitable for use..

£157.22

NIMBUS GREY 10A07 - All Weather Pipe Identification (ID) Tape

Size: 150mm x 23m Colour: NIMBUS GREY 10A07 Technical Specification: White Polyester laminated with Linerless Transparent Polyester Excellent UV Protection. Resists most common oils, aliphatic solvents such as Heptan, Kerosene and alcohols when applied to impervious substrates. Suitable for us..

£135.16

NIMBUS GREY 10A07 - All Weather Pipe Identification (ID) Tape

Size: 50mm x 23m Colour: Nimbus Grey - 10A07 Technical Specification: White Polyester laminated with Linerless Transparent Polyester Excellent UV Protection. Resists most common oils, aliphatic solvents such as Heptan, Kerosene and alcohols when applied to impervious substrates. Suitable for ..

£45.06

NITROGEN (N2) (150mm) - All Weather Pipe Identification (ID) Tape

Size: 150mm x 23m Colour: Black/Yellow Ochre Technical Specification: White Polyester laminated with Linerless Transparent Polyester Excellent UV Protection. Resists most common oils, aliphatic solvents such as Heptan, Kerosene and alcohols when applied to impervious substrates. Suitable for ..

£157.22

NITROGEN (N2) (50mm) - All Weather Pipe Identification (ID) Tape

Size: 50mm x 23m Colour: Black/Brown 06C39Technical Specification: White Polyester laminated with Linerless Transparent Polyester Excellent UV Protection. Resists most common oils, aliphatic solvents such as Heptan, Kerosene and alcohols when applied to impervious substrates. Suitable for use on all..

£49.57

NITROGEN (N2) - All Weather Pipe Identification (ID) Tape

Size: 50mm x 33mmColour: Black 00E53 / Yellow Ochre 08C35Technical Specification: White rigid PVC coated one side with a transparent resin rubber adhesive laminated with a 30 micron transparent polypropylene for environmental protection. Recommended for internal use only.British ..

£49.57

NITROGEN (N2) - All Weather Pipe Identification (ID) Tape 1 - 2 Weeks

NITROGEN (N2) - All Weather Pipe Identification (ID) Tape

Size: 50mm x 23m Colour: Black/Yellow Ochre 08C35Technical Specification: White Polyester laminated with Linerless Transparent Polyester Excellent UV Protection. Resists most common oils, aliphatic solvents such as Heptan, Kerosene and alcohols when applied to impervious substrates. Suitable for use..

£49.57

O2 (Oxygen) - All Weather Pipe Identification (ID) Tape New

O2 (Oxygen) - All Weather Pipe Identification (ID) Tape

Size: 150mm x 23m Colour: Yellow Ochre 08C35 /white with black text Technical Specification: White Polyester laminated with Linerless Transparent Polyester Excellent UV Protection. Resists most common oils, aliphatic solvents such as Heptan, Kerosene and alcohols when applied to impervious subs..

£157.22

Oil (Arrow) - All Weather Pipe Identification (ID) Tape

Size: 150mm x 23m Colour: White/Brown Technical Specification: White Polyester laminated with Linerless Transparent Polyester Excellent UV Protection. Resists most common oils, aliphatic solvents such as Heptan, Kerosene and alcohols when applied to impervious substrates. Suitable for use..

£157.22

OXYGEN (O2) - All Weather Pipe Identification (ID) Tape

Size: 50mm x 23m Colour: White/BlackTechnical Specification: White Polyester laminated with Linerless Transparent Polyester Excellent UV Protection. Resists most common oils, aliphatic solvents such as Heptan, Kerosene and alcohols when applied to impervious substrates. Suitable for use on all pipe ..

£49.57

PALE GREEN 6021 - All Weather Pipe Identification (ID) Tape

Size: 50mm x 23m Colour: Pale Green RAL 6021 Technical Specification: White Polyester laminated with Linerless Transparent Polyester Excellent UV Protection. Resists most common oils, aliphatic solvents such as Heptan, Kerosene and alcohols when applied to impervious substrates. Suitable for use on..

£45.06

PALE LILAC 24C33 - All Weather Pipe Identification (ID) Tape

Size: 50mm x 23m Colour: Pale Lilac - 24C33 Technical Specification: White Polyester laminated with Linerless Transparent Polyester Excellent UV Protection. Resists most common oils, aliphatic solvents such as Heptan, Kerosene and alcohols when applied to impervious substrates. Suitable for u..

£45.06

POLYCLAY - All Weather Pipe Identification (ID) Tape

Size: 50mm x 23mmColour: White 00E55 / Black 00E53Technical Specification: White Polyester laminated with Linerless Transparent Polyester Excellent UV Protection. Resists most common oils, aliphatic solvents such as Heptan, Kerosene and alcohols when applied to impervious substrates. Suitable for us..

£49.57

POLYMER - All Weather Pipe Identification (ID) Tape

Size: 150mm x 23mm Colour: Black 00E53 / Violet 22C37 Technical Specification: White Polyester laminated with Linerless Transparent Polyester Excellent UV Protection. Resists most common oils, aliphatic solvents such as Heptan, Kerosene and alcohols when applied to impervious substrates. ..

£157.22

PolyWeld (Non-Vulcanising) - All Weather Pipe Identification (ID) Tape

Campbell International All Weather PolyWeld Pipeline (Non-Vulcanising) Identification Tape - For use on Kaifle x Protect R and Other Protective Coatings Do you have trouble sticking tape to rubber insulation because of vulcanising of the adhesive with the rubber, this chemical reaction cause..

£114.35

PRODUCED WATER / COOLING - All Weather Pipe Identification (ID) Tape

Size: 150mm x 23m Colour: White on Green 12D45 Technical Specification: White Polyester laminated with Linerless Transparent Polyester Excellent UV Protection. Resists most common oils, aliphatic solvents such as Heptan, Kerosene and alcohols when applied to impervious substrates. Suitable for..

£157.22

QUENCH OIL - All Weather Pipe Identification (ID) Tape

Size: 50mm x 23m Colour: White text on Brown 06C39 Technical Specification: White Polyester laminated with Linerless Transparent Polyester Excellent UV Protection. Resists most common oils, aliphatic solvents such as Heptan, Kerosene and alcohols when applied to impervious substrates. Suitable for ..

£49.57

RAW WATER - All Weather Pipe Identification (ID) Tape

Size: 48mm x 23m Colour: Black/Green 12D45 Technical Specification: White Polyester laminated with Linerless Transparent Polyester Excellent UV Protection. Resists most common oils, aliphatic solvents such as Heptan, Kerosene and alcohols when applied to impervious substrates. Suitable for use on a..

£49.57

RETURN - All Weather Pipe Identification (ID) Tape

Size: 50mm x 23m Colour: Black/White Technical Specification: White Polyester laminated with Linerless Transparent Polyester Excellent UV Protection. Resists most common oils, aliphatic solvents such as Heptan, Kerosene and alcohols when applied to impervious substrates. Suitable for use on a..

£40.97

SAFETY RED 04E53 (50mm x 23m) - All Weather Pipe Identification (ID) Tape

Size: 50mm x 23m Colour: Safety Red 04E53 Technical Specification: White Polyester laminated with Linerless Transparent Polyester Excellent UV Protection. Resists most common oils, aliphatic solvents such as Heptan, Kerosene and alcohols when applied to impervious substrates. Suitable for use..

£45.06

SAFETY RED 04E53 (50mm x 30m) - All Weather Pipe Identification (ID) Tape

Size: 50mm x 30m Colour: Safety Red 04E53 Technical Specification: White Polyester laminated with Linerless Transparent Polyester Excellent UV Protection. Resists most common oils, aliphatic solvents such as Heptan, Kerosene and alcohols when applied to impervious substrates. Suitable for use on al..

£58.77

SALMON 04C33 - All Weather Pipe Identification (ID) Tape

Size: 50mm x 23m Colour: 04C33 Salmon Technical Specification: White Polyester laminated with Linerless Transparent Polyester Excellent UV Protection. Resists most common oils, aliphatic solvents such as Heptan, Kerosene and alcohols when applied to impervious substrates. Suitable for use on a..

£45.06

SEA WATER - All Weather Pipe Identification (ID) Tape

Size: 50mm x 23m Colour: White/Black/GreenTechnical Specification: White Polyester laminated with linerless Transparent Polyester Excellent UV Protection. Resists most common oils, aliphatic solvents such as heptan, kerosene and alcohols when applied to impervious substrates. Suitable for use on all..

£49.57

SEWAGE / PERMEATE - All Weather Pipe Identification (ID) Tape

Size: 50mm x 23m Colour: White/Black/BlueTechnical Specification: White Polyester laminated with linerless Transparent Polyester Excellent UV Protection. Resists most common oils, aliphatic solvents such as heptan, kerosene and alcohols when applied to impervious substrates. Suitable for use on all ..

£49.57

SHAMPOO CONCENTRATE - All Weather Pipe Identification (ID) Tape

Size: 50mm x 23m Colour: Black/Violet 22C37Technical Specification: White Polyester laminated with Linerless Transparent Polyester Excellent UV Protection. Resists most common oils, aliphatic solvents such as Heptan, Kerosene and alcohols when applied to impervious substrates. Suitable for use on al..

£49.57

SHAMPOO CONCENTRATE - All Weather Pipe Identification (ID) Tape

Size: 50mm x 23m Colour: White 00E55 / Brown 06C39 Technical Specification: White Polyester laminated with Linerless Transparent Polyester Excellent UV Protection. Resists most common oils, aliphatic solvents such as Heptan, Kerosene and alcohols when applied to impervious substrates. Suitable for ..

£49.57

SHELL SOL D100 - All Weather Pipe Identification (ID) Tape

Size: 50mm x 23m Colour: White/Brown 06C39Technical Specification: White Polyester laminated with linerless Transparent Polyester Excellent UV Protection. Resists most common oils, aliphatic solvents such as heptan, kerosene and alcohols when applied to impervious substrates. Suitable for use on all..

£49.57

Silver Arrows Across the Tape - All Weather Pipe Identification (ID) Tape

Size: 48mm x 23m Colour: Silver/White Technical Specification: White Polyester laminated with Linerless Transparent Polyester Excellent UV Protection. Resists most common oils, aliphatic solvents such as Heptan, Kerosene and alcohols when applied to impervious substrates. Suitable for use on ..

£40.97

SILVER GREY 10A03 - All Weather Pipe Identification (ID) Tape

Size: 150mm Colour: Silver Grey 10A03 Technical Specification: White Polyester laminated with Linerless Transparent Polyester Excellent UV Protection. Resists most common oils, aliphatic solvents such as Heptan, Kerosene and alcohols when applied to impervious substrates. Suitable for use on a..

£135.16