IWC8 - Plug Code Wiring Tape / ID Labels

IWC8 - Plug Code Wiring Tape / ID Labels

Size: 50mm x 33m
Labels per roll: 170
Text reads:

FLEXIBLE CORD WARNING LABEL

If the socket outlets in the home are not suitable for the plug supplied with this appliance it should be cut off and an appropriate three pin plug fitted.  

NOTE- The plug severed from the mains lead must be destroyed. as a plug with bared flexible cord is hazardous if engaged in a live socket outlet. Use a 13A fuse approved by ASTA to BS1362, ie. carries the [] mark.  

Always replace the fuse cover, never use the plug with the fuse cover omitted. 

WARNING - THIS APPLIANCE MUST BE EARTHED  

IMPORTANT  

The wires in this mains lead are coloured in accordance with the following codes:-  

Green & Yellow – Earth, Blue – Neutral, Brown - Live  

As the colours of the wires in the mains lead at this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:- 

The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked with the letter E or by the earth symbol or coloured green or green-and-yellow. 

The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.  

The wire which is coloured brown must connected to the terminal which is marked with the letter L coloured red.  

If a 13 amp (BS 1363) Plug is used a 3 amp Fuse must be fitted, or any other type of Plug is used a 5 amp Fuse must be fitted either in the Plug or Adaptor or at the Distribution Board.  


Specification:
Base - Rigid PVC white film
Thickness: 0.060mm
Adhesion: 700g/24mm
Tensile strength: 11kg/24mm
Elongation: 40%
Temperature: -40°C to +70°C

Laminate - Transparent Polypropylene
Thickness: 0.050mm
Adhesion: 1050g/24mm
Tensile Strength: 11kg/24mm
Elongation: 100%

Recommended for indoor use. Please contact us for custom print/sizes.

Codes
MPN 521

Write a review

Please login or register to review
  • £15.84