Banded Indoor Pipe ID Tape

Banded Indoor Pipe ID Tape

BS 1710:1984 & BS1710:2014 – Recommendations – (Identification of pipelines and services) Part 6.3
3 colour bands shall be placed at junctions, at both sides of each valve, service appliance, bulkhead and wall penetration and at any other place where identification is necessary. The outside colour bands shall be the basic identification colour for the particular family of fluid. The centre band may be one colour or a combination of colours.

Marine Pipe Identification Tape Marine Pipe Identification Tape
Campbell International marine pipework identification tape conforms to ISO 14726, these tapes are used to identify the contents of pipes in oil rigs, ships and marine buildings. Please click on the image to the left to view the range. Please Contact Us with your requirements.
Hospital Pipe Identification Tape Hospital Pipe Identification Tape
Campbell International hospital pipework identification tape conforms to ISO 14726, these tapes are used to identify the contents of pipes in hospitals and medical buildings. Please click on the image to the left to view the range. Please Contact Us with your requirements.


Click here for our range of all weather (outdoor) banded pipeline identification tape.


Example british standard colour coding system:

Show:
Sort By:

ACID WASTE - Colour Printed Pipe Identification (ID) Tape

Size: 144mm x 33m Colour: Black/Violet 22C37 Technical Specification: White rigid PVC coated one side with a transparent resin rubber adhesive laminated with a 30 micron transparent polypropylene for environmental protection. Recommended for internal use only.British Standards: BS 1710:1984, B..

£47.25

ACTIVATED THICKENED - Banded Pipe Identification (ID) Tape 1 - 2 Weeks

ACTIVATED THICKENED - Banded Pipe Identification (ID) Tape

Size: 144mm x 33m Colour: Reverse white on black with crimson 04D45 centreband Technical specification: White rigid PVC coated one side with a transparent resin rubber adhesive laminated with a 30 micron transparent polypropylene for environmental protection. Recommended for internal use only..

£47.25

AGS (Anesthetic Gas Scavenging) - BS1710:1984 Banded Pipe Identification (ID) Tape

Size: 144mm x 33m Technical specification: 144mm laminated pipeline identification tape perforated every 62mm into labels. White rigid PVC coated one side with a transparent resin rubber adhesive laminated with a 30 micron transparent polypropylene for environmental protection. Recommended for inte..

£47.25

AGS (Anesthetic Gas Scavenging) - BS1710:2014 Banded Pipe Identification (ID) Labels 1 - 2 Weeks

AGS (Anesthetic Gas Scavenging) - BS1710:2014 Banded Pipe Identification (ID) Labels

Size: 144mm x 33m Technical specification: 144mm laminated pipeline identification tape perforated every 62mm into labels. White rigid PVC coated one side with a transparent resin rubber adhesive laminated with a 30 micron transparent polypropylene for environmental protection. Recommended for inte..

£47.25

Arrows Across the Tape (48mm) - White Printed Pipe Identification (ID) Tape

Size: 48mm x 33m Colour: Black/White Technical specification: White rigid PVC coated one side with a transparent resin rubber adhesive laminated with a 30 micron transparent polypropylene for environmental protection. Recommended for internal use only. ..

£12.29

Blue - Banded Pipe Identification ID Tape -79%

Blue - Banded Pipe Identification ID Tape

Size: 144mm x 33m Colour: Purple-Blue/Light Blue 20E51/Purple-Blue BandsTechnical specifications: White rigid PVC coated one side with a transparent resin rubber adhesive laminated with a 30 micron transparent polypropylene for environmental protection. Recommended for internal use only...

£47.25 £10.00

BREATHING AIR - Banded Pipe Identification (ID) Tape

Size: 144mm x 33m Colour: White/Yellow Ochre Technical Specification: White rigid PVC coated one side with a transparent resin rubber adhesive laminated with a 30 micron transparent polypropylene for environmental protection. Recommended for internal use only. British Standard: BS1710:..

£47.25

CENTRAL HEATING 100C - Banded Pipe Identification (ID) Tape

Size: 144mm x 33mColour: White on green, blue crimson blue band Technical specifications: White rigid PVC coated one side with a transparent resin rubber adhesive laminated with a 30 micron transparent polypropylene for environmental protection. Recommended for internal use only...

£47.25

CHILLED WATER - Banded Pipe Identification (ID) Tape

Size: 144mm x 33m Colour: White on green with white blue white sequential bands Technical specification: White rigid PVC coated one side with a transparent resin rubber adhesive laminated with a 30 micron transparent polypropylene for environmental protection. Recommended for internal use only.Briti..

£47.25

CO2 - Banded Pipe Identification (ID) Tape

Size: 144mm x 33m Colour: Black/Yellow Ochre/Grey Band Technical specifications: White rigid PVC coated one side with a transparent resin rubber adhesive laminated with a 30 micron transparent polypropylene for environmental protection. Recommended for internal use only.British Standard: BS 1710:20..

£47.25

COLD WATER - BS1710:2014 Banded Indoor Pipe ID Tape

Size: 144mm x 33m Colour: Auxillary Blue 18E53/Green Technical Specification: White rigid PVC coated one side with a transparent resin rubber adhesive laminated with a 30 micron transparent polypropylene for environmental protection. Recommended for internal use only. British Standard:&nb..

£47.25

COLD WATER SUPPLY - BS 1710:1984 Banded Pipe ID Tape 1 - 2 Weeks

COLD WATER SUPPLY - BS 1710:1984 Banded Pipe ID Tape

Size: 144mm x 33mColour:  White text on green (12D45) with white blue (18E53) white sequential bands.Technical specifications: White rigid PVC coated one side with a transparent resin rubber adhesive laminated with a 30 micron transparent polypropylene for environmental protection. Recommended..

£47.25

COLD WATER SUPPLY BS 1710:2014 - Banded Pipe ID Tape

Size: 144mm x 33mColour: White text on green (12D45)/auxiliary blue (18E53)/green (12D45); cold water on one side with arrows on the other side.Technical specifications: White rigid PVC coated one side with a transparent resin rubber adhesive laminated with a 30 micron transparent polypro..

£47.25

COMBUSTION AIR - Banded Pipe Identification ID Tape

Size: 144mm x 33m Colour: Green/Yellow Ochre Technical Specification: White rigid PVC coated one side with a transparent resin rubber adhesive laminated with a 30 micron transparent polypropylene for environmental protection. Recommended for internal use only. ..

£47.25

CONDENSATE - Banded Pipe Identification ID Tape

Size: 144mm x 33m Colour: Geen 12D45/Grey/Black Technical Specification: White rigid PVC coated one side with a transparent resin rubber adhesive laminated with a 30 micron transparent polypropylene for environmental protection. Recommended for internal use only.British Standard: BS 1710:2014 ..

£47.25

CONDENSATE - Banded Pipe Identification ID Tape 1 - 2 Weeks

CONDENSATE - Banded Pipe Identification ID Tape

Size: 144mm x 33m Colour: Green/Red  Technical Specification: White rigid PVC coated one side with a transparent resin rubber adhesive laminated with a 30 micron transparent polypropylene for environmental protection. Recommended for internal use only. British Standard: BS 1710:1984..

£47.25

COOLING WATER - Banded Pipe Identification ID Tape

Size: 145mm x 33mColour: White on green with white centre bandTechnical specification: White rigid PVC coated one side with a transparent resin rubber adhesive laminated with a 30 micron transparent polypropylene for environmental protection. Recommended for internal use only. ..

£47.25

DEMIN WATER - Banded Pipe Identification ID Tape

Size: 144mm x 33m Colour: Black/Green 12D45 Technical Specification: White rigid PVC coated one side with a transparent resin rubber adhesive laminated with a 30 micron transparent polypropylene for environmental protection. Recommended for internal use only.British Standards: BS 1710:1984, BS 1710..

£47.25

DEMINERALISED WATER - Banded Pipe Identification ID Tape

Size: 144mm x 33m Colour: Green/White Technical Specification: White rigid PVC coated one side with a transparent resin rubber adhesive laminated with a 30 micron transparent polypropylene for environmental protection. Recommended for internal use only. ..

£47.25

DIESEL FUEL (Arrow) - Banded Pipe Identification ID Tape

Size: 144mm x 33m Colour: Reverse white on black with brown outer bands, Technical specification: White rigid PVC coated one side with a transparent resin rubber adhesive laminated with a 30 micron transparent polypropylene for environmental protection. Recommended for internal use only. ..

£47.25

DIESEL FUEL - Banded Pipe Identification ID Tape

Size: 144mm x 33m Colour: White on brown with white centre band Technical specification: White rigid PVC coated one side with a transparent resin rubber adhesive laminated with a 30 micron transparent polypropylene for environmental protection. Recommended for internal use only.British Standard: BS ..

£47.25

DIGESTED - Banded Pipe Identification ID Tape

Size: 144mm x 33m Colour: White on black, green 14E53 band Technical specification: White rigid PVC coated one side with a transparent resin rubber adhesive laminated with a 30 micron transparent polypropylene for environmental protection. Recommended for internal use only...

£47.25

DIGESTED SLUDGE - Banded Pipe Identification ID Tape

Size: 144mm x 33m Colour: Black and Brown 06C39 with white 00E55 band Technical specification: White rigid PVC coated one side with a transparent resin rubber adhesive laminated with a 30 micron transparent polypropylene for environmental protection. Recommended for internal use only...

£47.25

DISTRICT HEATING - Banded Pipe Identification ID Tape

Size: 144mm x 33m Colour: Green 12D45/Red/Blue Technical Specification: White rigid PVC coated one side with a transparent resin rubber adhesive laminated with a 30 micron transparent polypropylene for environmental protection. Recommended for internal use only.British Standard: BS 1710:1984 ..

£47.25

DRAINAGE - Banded Pipe Identification ID Tape

Size: 144mm x 33m Colour: White/Black Technical Specification: White rigid PVC coated one side with a transparent resin rubber adhesive laminated with a 30 micron transparent polypropylene for environmental protection. Recommended for internal use only. British Standards: BS 1710:1984, BS 1710:201..

£47.25

DRINKING WATER - Banded Pipe Identification ID Tape

Size: 144mm x 33m Colour: Green/White Technical Specification: White rigid PVC coated one side with a transparent resin rubber adhesive laminated with a 30 micron transparent polypropylene for environmental protection. Recommended for internal use only. British Standard: BS 1710:2014..

£47.25

EFFLUENT DRAINS - Banded Pipe Identification ID Tape

Size: 144mm x 33m Colour: Reverse white on black with crimson 04D45 centreband Technical specification: White rigid PVC coated one side with a transparent resin rubber adhesive laminated with a 30 micron transparent polypropylene for environmental protection. Recommended for internal use only..

£47.25

Entonox Nitrous Oxide + Oxygen 50/50 - BS1710:1984 Banded Pipe Identification (ID) Labels

Size: 144mm x 33m Technical specification: 144mm laminated pipeline identification tape perforated every 62mm into labels. White rigid PVC coated one side with a transparent resin rubber adhesive laminated with a 30 micron transparent polypropylene for environmental protection. Recommended for ..

£47.25

Entonox Nitrous Oxide + Oxygen 50/50 - BS1710:2014 Banded Pipe Identification (ID) Labels 1 - 2 Weeks

Entonox Nitrous Oxide + Oxygen 50/50 - BS1710:2014 Banded Pipe Identification (ID) Labels

Size: 144mm x 33m Technical specification: 144mm laminated pipeline identification tape perforated every 62mm into labels. White rigid PVC coated one side with a transparent resin rubber adhesive laminated with a 30 micron transparent polypropylene for environmental protection. Recommended for ..

£47.25

Entonox O2 + N2O 50/50 - Banded Pipe Identification (ID) Tape 1 - 2 Weeks

Entonox O2 + N2O 50/50 - Banded Pipe Identification (ID) Tape

Size: 144mm x 33m Colour: Black on yellow orche, blue and white band Technical specifications: White rigid PVC coated one side with a transparent resin rubber adhesive laminated with a 30 micron transparent polypropylene for environmental protection. Recommended for internal use only.British Standa..

£47.25