IWC11 - Plug Code Wiring Tape / ID Labels

1 - 2 Weeks IWC11 - Plug Code Wiring Tape / ID Labels

Size: 50mm x 33m
Labels per roll: 170
Text reads:

IMPORTANT  

If the available socket outlet is not suitable for the plug supplied with this equipment, it should be cut off and an appropriate three pin plug fitted. With alternative plugs an approved fuse must be fitted in the plug.

NOTE: The plug severed from the mains lead must be destroyed as a plug with bared flexible cords hazardous if engaged in a live socket outlet.  

In the event of replacing the plug fuse, use a fuse approved by ASTA to BS1362. i.e. carries the [ ] mark, rating as marked on plug. 

Always replace the fuse cover, never use plugs with the fuse cover omitted.  

WARNING - THIS APPLIANCE MUST BE EARTHED  

The wires in this mains lead are coloured in accorance with the following code:- 
Green and yellow  Earth 
Blue  Neutral 
Brown  Live 

As the colours of the wiring in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows. 

The wire which is coloured green and yellow must be connected to the terminal in the plug which is marked with the letter E or by the earth symbol [ ] or coloured green or green and yellow. 

The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black or blue. 

The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red or blown. 


Specification:
Base - Rigid PVC white film
Thickness: 0.060mm
Adhesion: 700g/24mm
Tensile strength: 11kg/24mm
Elongation: 40%
Temperature: -40°C to +70°C

Laminate - Transparent Polypropylene
Thickness: 0.050mm
Adhesion: 1050g/24mm
Tensile Strength: 11kg/24mm
Elongation: 100%

Recommended for indoor use. Please contact us for custom print/sizes.

Codes
MPN 523

Write a review

Please login or register to review
  • £15.84